Portable, fixed and semi-fixed machines

For diameter blades between 115 and 230 mm with power from 600 to 2.800 W.
Suitable for cutting slabs, beams, tiles, brick, marble and granite. The uses of the grinder (Radial) are multiple, being an indispensable tool for construction companies, installers, welders, plumbers, etc.

For diameter blades between 115 mm and 250 mm with power from 900W to 2.800 W.
Provided with two diamond blades, these machines allow to do, with a single pass, grooves of different depths and widths.
They are perfectly suited to the work of electricians and plumbers, because they allow you to work on all types of materials and surfaces.

For diameter blades between 300 and 400 mm and power up to 10 HP.
The large diameter of the disc allows to cut strong thicknesses especially reinforced concrete, in case there are changes to be made in prefabricated panels, connections to sewers, demolition of reinforced concrete structures, cutting curbs, etc.

For diameter drills between 10 and 230 mm with power from 600 to 2.800 W.
Suitable for drilling, especially in dry, stoneware, ceramics, bricks, tiles, polyester, marble and granite.
The drill is an indispensable tool wherever they perform electrical, plumbing and ventilation installations.

For diameter blades between 300 and 900 mm with power from 3 to 10 HP.
In this case it is a static machine used for continuous works or that require extreme precision in cutting. These machines usually work with water cooling.

For diameter blades between 115 and 350 mm and power from 1 to 3 HP.
For wet cutting marble and ceramic in workshops or on site.

For diameter blades between 300 and 900 mm with power from 5,5 to 60 HP.
Suitable for cutting concrete paving, asphalt and general roads. Can have an electric, hydraulic or explosion motor. These machines must always be used with a high amount of refrigerant and driving can be manual or automatic advance. There are two families typically known as low power up to 15 HP, and high power from 16 HP and up.

For diameter drills between 30 and 300 mm, length between 300 and 500 mm and power between 1.500 and 5.000 W.
Suitable for wet drilling cement (reinforced), concrete, limestone, brick, etc ...

For diameter drills between 10 and 100 mm, length between 40 and 500 mm and power from 750 to 4.000 W. Suitable for wet drilling granite, marble and stones in general, stoneware, ceramics, cement, bricks, polyester, etc ...